-
Co2 Laer Tube 100~150W
It’s universal model and can work with almost all engraving cutting machine/engraver from China; Good TEMOO beam mode,long service life;The high and low voltage end have been welding and also connected by the high voltage connector,so the tube is more easier to install.
It can replace any same power or length CO2 laser tube; and also used for power upgrading of the CO2 laser.It’s better to work with compatible power supply.
Advanced manufacturing technology effectively avoids leakage and sparks;High-quality boron silicate glass material, advanced coating technology and full of catalyst in the tube, effectively improve the service life and increase the laser power.$139.90 -
MCWlaser CVD ZnSe Focus Lens Dia: 19mm FL: 2″/ 50.8mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 19mm,Focal length: 2″ 50.8mm$30.00 -
MCWlaser CVD ZnSe Focus Lens Dia: 19mm FL:4″/ 101.6mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 19mm,Focal length: 4″ 101.6mm$30.00 -
MCWlaser CVD ZnSe Focus Lens Dia: 20mm FL: 1.5″/ 38.1mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 20mm,Focal length: 1.5″ 38.1mm$30.00 -
MCWlaser CVD ZnSe Focus Lens Dia: 20mm FL: 1″/ 25.4mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 20mm,Focal length: 1″ 25.4mm$30.00 -
MCWlaser CVD ZnSe Focus Lens Dia: 20mm FL: 2.5″/ 63.5mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 20mm,Focal length: 2.5″ 63.5mm$30.00 -
MCWlaser CVD ZnSe Focus Lens Dia: 20mm FL: 2″/ 50.8mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 20mm,Focal length: 2″ 50.8mm$29.70 -
MCWlaser CVD ZnSe Focus Lens Dia: 20mm FL:4″/ 101.6mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 20mm,Focal length: 4″ 101.6mm$30.00 -
MCWlaser CVD ZnSe Focus Lens Dia: 20mm FL:5″/ 127mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 20mm,Focal length: 5″ 127mm$30.00 -
MCWlaser CVD ZnSe Focus Lens Dia: 20mm FL:7.5″/ 190.5mm for CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 20mm,Focal length: 7.5″ 190mm$30.00 -
MCWlaser CVD ZnSe Focus Lens Dia: 25mm FL: 2.5″/ 63.5mm For CO2 Laser Engraver Cutter 40W 50W 60W 80W 100W 130W 150W 180W 200W
II-VI ZnSe coating 10600nm
ET=2.3mm
Diameter: 25mm,Focal length: 2.5″ 63.5mm$50.00